TTP1(N)

TTP1(N) EIA standard tone termination panel that can be interfaced to virtually any radio. 

General:

• Input voltage +12 to +13.8 VDC @ 150 mA (18mA idle)
• Line impedence 600 ohms
• Line ouput to phone line +10 dBm max. preset to 0 dBm
• Line ouput from phone line -40 dBm to +10 dBm (function tone referenced)
• RX input from radio 70 mVrms or greater
• Notch fi lter 2175 down 50 dB from 1000 Hz reference

Dimensions:

• TTP(N) series 5.3” wide x 1” high x 5” deep - unenclosed
• TTP(N)-C/MR series 5.5” wide x 1.5” high x 6.5” deep
• TTP216 5.5” wide x 1.5” high x 7.5” deep

Control Tones:

• Guard tone = 2175Hz for 40 mS
• Function tones F1-F16 = 1950-450 Hz for 40 mS
• Monitor = 2050 Hz for 40 mS
• Hold tone = 2175 Hz for duration of PTT

Control function outputs:

• PTT and monitor selection are form “C” relay contacts. 1 amp @30 VDC
• F1/F2 are form “C” relay contact or open collector
• F3-F16 are open collector

Options:

• -C/TTP(N) Black, vinyl clad steel and aluminum enclosure for the TTP(N) series
• Rack/TTP(N) Single height 19” rack holds 3 TTP(N), MR, or TTP216 panels
• -80 cable Pre-made cable connects the TTP(N) series to the KCT-19 connector on -80 series mobiles
• -90 cable Pre-made cable connects the TTP(N) series to the DB25 on the -90 series
• 216-90 Pre-made cable connects the TTP216 series to the DB25 on the -90 series
• -MOT/cable Pre-made cable connects the TTP(N) series to the 16 pin accessory connector on most Motorola mobiles
• 216-MOT Pre-made cable connects the TTP216 series to the 16 pin accessory conn