search

TTP216

EIA standard 16 frequency user programmable tone termination panel

TTP216: EIA standard 16 frequency user programmable tone termination panel. Can be program for any standard 1950-450 Hz function tones in any position or choose from one of the 14 standard pre-sets. 

General:

  • Input voltage +12 to +13.8 VDC @ 150 mA (18mA idle)
  • Line impedence 600 ohms
  • Line ouput to phone line +10 dBm max. preset to 0 dBm
  • Line ouput from phone line -40 dBm to +10 dBm (function tone referenced)
  • RX input from radio 70 mVrms or greater
  • Notch fi lter 2175 down 50 dB from 1000 Hz reference

Dimensions:

  • TTP216 5.5” wide x 1.5” high x 7.5” deep

Control Tones:

  • Guard tone = 2175Hz for 40 mS
  • Function tones F1-F16 = 1950-450 Hz for 40 mS
  • Monitor = 2050 Hz for 40 mS
  • Hold tone = 2175 Hz for duration of PTT

Control function outputs:

  • PTT and monitor selection are form “C” relay contacts. 1 amp @30 VDC
  • F1/F2 are form “C” relay contact or open collector
  • F3-F16 are open collector

Options:

  • -C/TTP(N) Black, vinyl clad steel and aluminum enclosure for the TTP(N) series
  • Rack/TTP(N) Single height 19” rack holds 3 TTP(N), MR, or TTP216 panels
  • -80 cable Pre-made cable connects the TTP(N) series to the KCT-19 connector on -80 series mobiles
  • -90 cable Pre-made cable connects the TTP(N) series to the DB25 on the -90 series
  • 216-90 Pre-made cable connects the TTP216 series to the DB25 on the -90 series
  • -MOT/cable Pre-made cable connects the TTP(N) series to the 16 pin accessory connector on most Motorola mobiles
  • 216-MOT Pre-made cable connects the TTP216 series to the 16 pin accessory conn